Comments on: Adjusting A Coin Mech http://www.arcaderepairtips.com/2009/06/19/adjusting-a-coin-mech/ Fix The Game, Play The Game Mon, 23 Aug 2010 19:53:08 +0000 hourly 1 http://wordpress.org/?v=3.0.1 By: Jonathan Leung http://www.arcaderepairtips.com/2009/06/19/adjusting-a-coin-mech/comment-page-1/#comment-30 Jonathan Leung Sat, 01 Aug 2009 18:54:52 +0000 http://www.varcadeentertainment.com/arcaderepairtips/?p=168#comment-30 Dave, While HAPP Controls is a great supplier, it's possible that they sent you the wrong coin mechs. If you have tried adjusting them like we show in the video you might contact HAPP to see if they have a solution. You can also take a picture of it and email it to us if you would like us to assist you further. Thanks for your compliments and let us know if there is anything more we can do to help you in the future. Dave,

While HAPP Controls is a great supplier, it’s possible that they sent you the wrong coin mechs. If you have tried adjusting them like we show in the video you might contact HAPP to see if they have a solution. You can also take a picture of it and email it to us if you would like us to assist you further.

Thanks for your compliments and let us know if there is anything more we can do to help you in the future.

]]> By: Dave http://www.arcaderepairtips.com/2009/06/19/adjusting-a-coin-mech/comment-page-1/#comment-28 Dave Sat, 01 Aug 2009 05:37:46 +0000 http://www.varcadeentertainment.com/arcaderepairtips/?p=168#comment-28 Hi, I just purchased a brand new HAPP coin door. It came with 2 Asahi coin mechs that were supposedly $0.25 mechs, but I think they are not. The cradle is much to wide, and a quarter slips right through to the return every time. A Canadian Loonie, by contrast, is just slightly too large in diameter for the cradle. I fear they may be set up for a large token or possibly Japanese currency. Would you happen to have any advice on whether or not I can adjust the coin mech for quarters? Short of replacing or altering the cradle I can't conceive of any solution myself. Great website, thanks! Dave Hi, I just purchased a brand new HAPP coin door. It came with 2 Asahi coin mechs that were supposedly $0.25 mechs, but I think they are not. The cradle is much to wide, and a quarter slips right through to the return every time. A Canadian Loonie, by contrast, is just slightly too large in diameter for the cradle. I fear they may be set up for a large token or possibly Japanese currency.

Would you happen to have any advice on whether or not I can adjust the coin mech for quarters? Short of replacing or altering the cradle I can’t conceive of any solution myself.

Great website, thanks!
Dave

]]> By: Jonathan Leung http://www.arcaderepairtips.com/2009/06/19/adjusting-a-coin-mech/comment-page-1/#comment-27 Jonathan Leung Thu, 30 Jul 2009 13:45:39 +0000 http://www.varcadeentertainment.com/arcaderepairtips/?p=168#comment-27 Javon, This is definitely something that we're looking at doing in the future. Before we take on that project, however, we want to make sure that people have firm grasp on the basics of arcade repair. It's good to know how an arcade game works with a board before moving on to using a computer. Please watch for this topic in future posts and thank you for your interest in our site. Javon,

This is definitely something that we’re looking at doing in the future. Before we take on that project, however, we want to make sure that people have firm grasp on the basics of arcade repair. It’s good to know how an arcade game works with a board before moving on to using a computer.

Please watch for this topic in future posts and thank you for your interest in our site.

]]> By: Javon http://www.arcaderepairtips.com/2009/06/19/adjusting-a-coin-mech/comment-page-1/#comment-25 Javon Wed, 29 Jul 2009 23:26:33 +0000 http://www.varcadeentertainment.com/arcaderepairtips/?p=168#comment-25 Hi! Could you please tell me how to construct a arcade machine using a computer tower and other necessary gadgets such as coinslots to work as one coin equals one credit, especially with the controls as up should function as up, down as down and so forth. Help would be much appreciated. Hi! Could you please tell me how to construct a arcade machine using a computer tower and other necessary gadgets such as coinslots to work as one coin equals one credit, especially with the controls as up should function as up, down as down and so forth. Help would be much appreciated.

]]>