Question from Bob: I just got a Sega Hang On which is missing the Power Supply the wiring diagram call for a 400-5035 5 volt 11 amp supply. I have a new happ supply that will deliver 15 amps, I have that covered. My problems is the game doesn’t have one in it so there is no way for me (amateur) to figure out how this get wired.

I have a orange and grey/white wire coming from the transformer I am assuming these are the AC connection I am not sure which is the line and which is the neutral?

Second I have a terminal plate on the right rear of the machine with five terminals. Two groups, toward the rear of the cabinet are two posts with white wires and toward the front of the cabinet are two posts with yellow wires.

Basically I have 6 wires to connect:

Orange Wire (from the transformer)

White/Gray (From transformer)

Yellow Wire (1) (to the Boards)

Yellow Wire (2) (to the Boards)

White (Wire 1) (to the Boards)

White (Wire 2) (to the boards)

Any help with how to hook these up wold be greatly appreciated.

The Sega manuals really aren’t very helpful.

Thanks
Bob