Return to Q&A Database
Re: Taito Space Invaders II problem
Question from Glenn: Jonathan, Thanks for the fast response, so my board looks different from the one on that site so I tried this test http://www.andys-arcade.com/personal/tech/SIvolts/index.htm and didn’t receive any readings at all, also the monitor has stopped coming up to title screen, now is just blank, but still sounds like screen is kicking on for a sec, static etc.
Thanks-Glenn
1 answer
Response from Jonathan: Glenn,
If you’re not getting any readings then you need to check your wiring between the AC Plug and the harness. You could also have a bad power supply even though your power supply board seems very clean. Also, remember to check the voltages with the game powered on. If you are not getting the readings that Andy talks about on his site, your game will not work properly.
Hope that helps. Thank you for your question and good luck with your repair.
This question has been closed
