Response from Jonathan: Ryan,
 
We’re not sure what this error means either. You might try checking your power supply to make sure that the voltage getting to the board is correct. If the voltage is low, it can cause random board issues like this. See our post on Checking and Replacing A Power Supply for more information. You can also check out our post on Inspecting An Arcade Board for some tips that might help you if the board is indeed the problem.
 
If you still are having problems after checking everything we mention in our posts then your board will probably need to be repaired. At this point, you might contact our friend Raymond at arcadecomponents.com. He does a lot of board repair (newer JAMMA boards included) and is an electronics guru. He might have some ideas for some specific places you can check on your board.
 
Hope that helps. Thank you for your question and good luck with your repair.