Response from Jonathan: Matt,

Looking at the wiring diagram on the KLOV page for the game, it looks like all the video output wires are coming from connector JST 13P which comes from the main game board through a filter board and goes to the monitor. This connector also contains the coin and start buttons. If you need help locating the connector, you should be able to trace the wires going to these locations back to the connector. Pins 1-5 on the JST 13P connector should be red, green, blue, sync, ground respectively. Just make sure that these wires are connected to the correct pins on your monitor chassis and you should be in business. Feel free to send us some pictures if you continue to have problems hooking up your monitor.

Hope that helps. Thank you for your question and good luck with your repair.